Raumer Hang Fix M10L (SS)

Art. 157 - HANG FIX Stainless Steel Bolt M10L – Ø10x86

Descrizione

Stainless steel AISI 316L bolt, designed for climbing, mountaineering and rescue anchors.

Highly resistant and reliable, it features two expanding collars and is suitable for use on numerous rock types.

Widely used by climbers on the majority of sport crags throughout the world.

Total length: diam.M10x86 mm. Double expansion bolt.

New type

The expanding collar is a new design and has greatly improved on the previous version.

The design phase focused on creating a technology which ensures expansion on an increased number of surfaces.

Our tests show that this objective has been achieved.

Attention: On particularly soft rocks (such as sandstone) all expansion bolts - including our own - are not recommended due to the unreliable nature of the supporting material.

In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.

Technical Specifications

The majority of our anchors are made with stainless steel AISI 316L, which offers a higher resistance to marine corrosion than the former AISI 304.

To highlight this difference each article is stamped with the relevant symbols.

However, bolts have not been branded as once in place, the symbols would be invisible, instead, a small circular collar has been added (see photo above) to mark the difference between the two metals.

This allows verification of the type of bolt used at any time.

There is also a “Marina” version of this anchor which is highly resistant to saline corrosion.

To mark the difference between stainless steel AISI 316L and the marina version of the same material, all marine-suitable anchors have been marked with a fish symbol and the initials “INOX".

Note: As mentioned above, this branding is not used on bolts.

In order to differentiate the marine version, as well as the afore-mentioned collar there is a small engraved dimple which allows for accurate identification once the bolt is in place (See photo above).

We recommend reading the attached PDF document for a detailed explanation of the problems presented by marine corrosion.

MARINA version: Art.157M

References

Extraction R = 21 Kn

Radial R = 26 Kn

Weight = 60 g

Reference legislation

See the attached data sheet

DOWNLOAD

Shipping

All orders can be expected to ship the available items within 2 business days from the order being placed, excluding Saturdays and Sundays.
Orders containing Pre-Order items will be sent in 2 split shipments with all available items being sent asap, and the remaining Pre-Order Items being sent when they become available.
For questions regarding open orders, email info@elevatedclimbing.com with your order number and inquiry.

What is Pre-Ordering?

When an items is marked as Pre-Order, it means it is either an item we recently ran out of stock of or don't typically keep it in stock.
Pre-Ordering an item guarantees it will make it on our next supplier order or is reserved for you if it is already in transit to the shop.
Pre-Order lead times can vary depending on the item. Typically you can expect a 2-4 week wait time on most Pre-Order items, however feel free to reach out to us at info@elevatedclimbing.com with any Pre-Order lead time questions and we will do our best to give you updated expected wait times.

Return Policy

We offer free return shipping on returnable items within 90 days of being delivered.
No returns can be accepted for life safety gear (i.e. hardware, helmets, harnesses, rope, etc) for the sake of quality control of critical components of our customers' safety.
To initiate a qualifying return, email info@elevatedclimbing.com with your order number and item you are looking to return.
Refunds are offered for the item(s) being returned, and do not include the initial shipping cost of the order, as the service of shipping has already been rendered.
Free return shipping only available in lower 48 states